Parts & Accessories

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal - Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included

- Adjustable handlebar mount for any Z Console - Puts the phone front & center of the stem in either landscape or portrait mode - Integrated GoPro camera mount - Sturdy aluminum construction - For 31.8mm handlebars (includes shims for smaller diameters)

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

MORE POWER, WITH SECURITY, MORE COMFORT. Water-repellent mobile phone case for the bicycle handlebar Everything in view - in any weather: The smartphone case COM/SMARTBAG can be attached to any COMPIT cell phone holder thanks to the adapter. A special COMPIT cover is therefore not necessary. The large transparent window ensures that the touchscreen is easy to operate, and it is also possible to unlock the cell phone with a fingerprint directly through the film. The lower extra compartment not only offers additional storage space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone while driving. For attachment to the COMPIT mobile phone holder system When touring in rough terrain, it is advisable to charge the cell phone with a cable. Optionally, the COM/UNIT can also be attached directly under the SMARTBAG to the COMPIT smartphone holder. In this case, the mobile phone must always be charged via cable through the cable guide. Suitable for smartphones with a maximum size of 155 x 80 x 15 mm. - Only compatible with the COMPIT system - Extra storage space - Water-repellent - Can be operated through foil - For all common smartphones - Weight: 115g

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 11 Pro

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone X/XS

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone XR/11

COMPIT Universal-Cover Adapter (or COMPIT Phone Covers) are needed to securely mount the phone to the COMPIT unit. The adapter with the special mounting device allows the phone to be docked into the COMPIT system. The cover attaches to the user's favorite phone case with self-adhesive 3M film.

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

Lightweight, rugged CNC machined aluminum aero bicycle mount. Simple, reliable single-pivot 31.8 bar clamp. Secondary adjustable swivel provides perfect device positioning. Compatible with Lezyne X-Lock mount GPS cycling computers. Extra-secure and replaceable Composite Matrix X-Lock insert. Refined aluminum design with classic Lezyne styling. All stainless steel hardware. Perfect for the cyclist looking to streamline his or her cockpit with a beautifully stealth anodized black GPS computer mount. - Weight: 37g

- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Removal key for T25 bolts security bolts included - Fits discreetly under a water bottle cage or mounted to accessory top tube bolts

Replacement GPS mount insert for the Direct X-Lock Mount System and the Alloy CNC Forward Mount.

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

Super-compact and lightweight magnet-less cycling sensors. The pair includes the Pro Speed Sensor (hub mounted) and the Pro Cadence Sensor (crank arm mounted). Both feature a translucent Composite Matrix construction with a LED indicator. And each has a high-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Replaceable CR2032 battery included. - Weight: 11g - Dimensions: 37 x 33 x 13mm

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails