Skip to main content

Canada-wide shipping - FREE over $150 for most items
(additional fee for bikes and some oversize items)

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

$12.49
Lightweight and strong 1-piece Polypropylene thermoplastic body with a durable ED black (Electrodeposition) aluminum cage - Tough boron steel axle - Built-in cage flip tab and mounting points for toe clips - Loose ball bearing axle assembly - Tough and durable ISO Mountain approved - 300g per pair - 9/16" axle - Dimensions: 102 x 62mm
$219.99
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
$39.99
Replacement axle kit for Chromag Contact pedals.
$64.99
Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.
$106.99 $214.99 50% Off
The Pilot is the union of Chromag's extensive flat pedal design combined with a proven, dual sided SPD compatible cleat engagement system. With a long, 110mm body, the Pilot's pins reach beyond the cleat channel of most shoes to provide a secure 4-point pin contact between shoe and pedal. The Pilot features our F.1 high-strength chromoly axle system, with a double seal, inner bushing, and outer cartridge bearing.
$111.99 $224.99 50% Off
The Pilot BA is the union of Chromag's extensive flat pedal design combined with a proven, dual sided SPD compatible cleat engagement system. With a long, 110mm body, the Pilot BA's pins reach beyond the cleat channel of most shoes to provide a secure 5-point pin contact between shoe and pedal. The Pilot BA features our G.3 high-strength chromoly axle system, with a double seal, inner bushing, and outer cartridge bearing.
$124.99
Little pedal for big rippers. We created the Radar for the young rippers. Designed around a platform shaped to fit kids' feet in the age range of approximately 4-10 years old. The Radar is made with the same precision axle and bearing system as our Contact and Scarab models for smooth running and long durability. It is serviceable and re-buildable. It features a lightweight extrusion design with our custom pins and our unique concave platform shape.
$189.99
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
$229.99
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever. - Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike. - The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing. - Largest Q-Factor, largest body, longest and largest amount of pins!
$22.49
- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
$216.99
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"
$36.49 - $72.99 $72.99 Up to 50% Off
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$159.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included
$209.99
The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.
$249.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.
$249.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.
$9.99
- High impact Resin multi-use body with integrated cage - Externally sealed ball bearing system - 100mm x 82mm platform - Weight: 316g pair (9/16")
$9.99
- High impact Resin platform with integrated pins - Heat-treated Boron spindle - Externally sealed ball bearing system - Weight: 290g pair (9/16"), 360g pair (1/2")
$14.99
Nylon toe clip straps, with zinc-plated steel quick-release buckles.
$14.99
- Strapless resin construction - Strapless design - Tough and lightweight, ideal for urban conditions with frequent stops
$14.99
- Double tongue resin toe-clips - Nylon straps with steel buckles
$19.99
- One-piece resin body and cage - Toe-clip compatible
$19.99
- Forged alloy body with non-slip steel cage - Heat treated Boron 9/16" axle spindle - Sealed cartridge bearing system - Weight: 240g pair (9/16")
$24.99
- Stability and comfort for city bikes and cruisers - Non-slip TPE tread has a distinctive grip texture that provides safe traction - Large platform is supportive and has a dual-concave shape - Lightweight plastic body with Boron steel spindle - Reflector Included - Comfortable for most shoe types
$24.99
- Moulded grip pins - 10 pins per side - One-piece alloy body
$27.99
- High-strenght Nylon body with injected fiber - 9/16" Cr-Mo axle - Ball bearings
$29.99
- Alloy body with steel cage - Toe clip compatible - 9/16" Cr-Mo axle
$31.99
- Lightweight alloy body with steel cage - Toe-clip compatible - 9/16-inch Cr-Mo axle
$34.99
- Extra-light design - 9/16-inch Cro-Mo axle, CNC machined alloy body - Toe-clip compatible
$39.99
- Woven nylon fiber material - Double hold system for strength - Durable for urban or MTN riding - Fits most BMX platform style pedals - Anti-slip adjustable design
Page 1 of 2 Next page