Tires/Tubes

PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14psi

- THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

LIGHTER, GRIPPIER, FASTER. The ‘turbo’ of spike tires. With up to 402 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The tire remains agile and sporty. Brand new studded tires must be ridden around 40km on asphalt roads without heavy acceleration and braking. This 'bed-in period' will ensure studs are fully set, after which, the studded tires can be used normally. - Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

BIG BETTY IS BACK! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary up front. - For Downhill and Enduro - Long, supported brake edges - Extra-strong shoulder knobs - Good self-cleaning properties

Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with the much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning

- The Eddy Current's solid appearance comes from the stable blocks, more rubber and the big widths. - It allows uncompromising riding even uphill, takes fierce acceleration as well as technical riding on the trails. - Blocks up to 20% more massive than other Enduro/All Mountain profiles. - Aggressive arrangement, open design and concise V-Grooves in the center and side blocks for direct, precise steering characteristics and perfect transmission of engine power to the ground, with extreme durability. Specs: - Tire Diameter/ISO: 29''/622 - Tire Width: 2.60 - 67 TPI - PSI: 20-45 - Bead: Folding - Tire Weight: 1415g - Tire Compound: Addix Soft - Tire Technology: Super Gravity - Tire Type: Tubeless Ready - Tubeless Technology: Tubeless Easy

Hans Dampf has everything to increase enduro fun. Choose it for stunning handling and the highest puncture protection on demanding trails—ascent as well as descent. - Precisely tuned stud positioning for controlled and forgiving riding at the limit - The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions - Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground Specs: - Tire Diameter/ISO: 29''/622 - 67 TPI - Bead: Folding - Tire Type: Tubeless Ready - Tubeless Technology: Tubeless Easy

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

Schwalbe's Ice Spiker Performance Line tire is the "turbo" of studded tires. It sports 361 spikes that bite firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The Ice Spiker is the best way to be agile and sporty while staying upright when the roads ice over. Note: In order to ensure that spikes are permanently fixed, tires should be run in for about 25 miles (40km) on asphalt, while avoiding any fast acceleration or heavy braking.

The Ultimate Gravity tire! The iconic Magic Mary with radial carcass provides more contact area and even more grip. - Radial carcass allows for a larger contact patch and conforms to terrain, yielding more grip, more comfort, and more control - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in muddy terrain - Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip - Angled studs in the middle of the tread optimize the rolling characteristics - TRAIL PRO version (Evo line) - Addix Ultra Soft compound - E-bike: E-50 - 1220g

The Shredda Front tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Literally sticks to the ground as the tire deforms more precisely at specific points - Profile optimized for radial carcass: Open tread design with high tread depth for excellent traction especially on soft surfaces - Radial carcass tires offer approximately 30% more contact area than conventional tires at the same air pressure. Even if the air pressure is increased by 50%, the contact area is still 15% larger - The carcass material overlaps for a shorter time and with less tension. As a result, the tire deforms more selectively and can react much more flexibly and adaptably to unevenness without sacrificing control - The increased contact area and the more flexible response behavior provide significantly more grip, more damping, more control and more comfort

The Shredda Rear tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Radial carcass allows for a larger contact area: more grip, more comfort, and more control - Almost sucks itself to the ground because the tire deforms so precisely - Slightly shallower tread depth than Shredda Front, but more stable profile optimized for radial carcass: Open tread design with scooping effect and high tread depth for excellent interlocking - Especially on soft surfaces, it generates a lot of braking and propulsion traction

The fastest downhill tire in the world! - Developed over two years in the World Cup races, including with DH overall World cup winner Amaury Pierron - Optimized 100% for precision - For even more aggressive cornering, shoulder lugs are 10% more stable compared to the Magic Mary - Long braking edges allow later braking point - Open shoulder area provides direct feedback and improves self-cleaning - Ramps on center lugs for optimal rolling characteristics - Evolution line, Super Downhill construction - Addix Ultra Soft compound - ECE: E-50 - 1320g

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

- The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering. - The reference in Downhill and Trail tires - Front specific design, but the DHF also makes an excellent option for a rear tire, with its balanced driving, braking, and cornering traction - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

Michelin Power Cross Mud's tread pattern transmits pedaling power more effectively in mud terrain for a controlled grip. - For low-pressure cycling on rugged terrain using specially adapted cotton reinforcements - PSI: 72 - Weight: 380g

- For Trail and Cross Country - Extremely versatile all-round tire - Has larger side lugs for cornering performance - Fast rolling and lots of traction - Available in Super Ground, Super Trail, and Twinskin construction - Available in Addix Speedgrip, Addix Performance, and Addix Super Race compounds