Electronics

Charger parts for Shimano STEPS.

Adapter for charging battery (BT-E8035) with charger (EC-E6000/E6002/E8004)

Shimano EC-DN100A Battery Charger - Includes Charging Cord. EC-EN100 is the compact new charger keeping your wireless Di2 battery charged up.

Charger parts for Shimano STEPS.

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths.

Compact design makes new electric components smaller and lighter

EP8 EP800 Series

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal - Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

Instant bike dashboard Enhance your riding experience while delta keeps your mobile phone safe. Whether cycling is a new hobby or you're an avid competitor, riding a mountain bike or a classic two-wheeler, this phone holder will provide full-screen visibility and hands-free access to ensure maximum safety for you AND your smartphone, while on the road! Features Mobile Phone Compatibility - Bicycle mobile phone mount compatible with phones up to 2.9 inch wide, .625 inch depth, 6 inch length (up to iPhone X and Samsung Galaxy 9 non plus + versions). Secure Mobile Phone Mounting - Weatherproof bungee and rubber inserts keep phone secure while delta’s patented cam lock provides added security for your mobile phone on rough terrain. Easily Accessible - Sliding system allows for easy in/out while on the go, stop for an important call, adjust navigation, and never worry about missing the perfect photo opportunity while riding. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Weight - 0.14 lbs / 65 grams

From daily commute to weekend ride, the CatEye AirGPS is ideal for anyone who wants to measure time, speed and distance. Simply click through to a different data field and transfer your ride data to your Smartphone via App to upload to supported platforms. - Sensorless GPS computer - Simple setup via smartphone app - 3-row display. Middle and lower row display programmable by smartphone. - Backlight (Night mode) - Hassle-free operation. ClickTec™ button interface, and automatically saves ride data by powering off. - 10hrs runtime - Stores up to 80 hours worth of route recording - Import ride data to Cateye Cycling™ and view it on app

- Universal: adaptator compatible with all smartphones
- Sticks directly on phone or phone case
- 3M VHB adhesive that dampens vibrations and has an extreme adhesive capacity
- Quarter-turn type Z-Mount allows to lock and unlock your phone in seconds
- Bi-material: overmolding guarantees flexibility and high resistance

- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included

Features
- Roll-top, waterproof smartphone case desingned for universal use
- Touch screen compatible
- Clear window for camera use
- Simple-to-use smartphone mount for bikes
- Easy installation in one click
- 360 degrees adjustable angle

Mounts to the Knock Block frame chip display tabs on Rail Gen 2 to mount the Bosch Kiox display behind the stem to keep your cockpit spotless.

Features
- Not Bosch Smart System compatible
- Designed for Rail Gen 2 frames
- Refer to Service Manual for assembly instructions and service

The right parts for the right bike.

Features
- Compatible with Carbon and Aluminum
- Refer to Service Manual for assembly instructions and service

Specific for Bosch Smart Systems.

Features
- 970mm cable length
- Mounting hardware not included

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

Keep your bike operating as it should.

Features
- Diametrically magnetized to improve sensor reception
- For use with 6-hole disc rotor mounts
- Compatible with rear dropout sensors only

Original replacement battery cover for your Powerfly.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware sold separately

Use a smaller battery in your 750Wh or 625Wh RIB battery slot.

Features
- For use with Bosch Smart System batteries only
- Used in 750Wh battery slots with 625Wh batteries
- Used in 625Wh battery slots with 500Wh batteries
- Not for use in 750Wh battery slots with 500Wh batteries
- Hardware is not included
- Refer to Service Manual for assembly instructions and service

Foam pads to help reduce movement of the battery inside a RIB cavity.

Features
- Compatible with all RIB equipped models
- Refer to Service Manual for assembly instructions and service

The extension cord is an optional item for the SRAM AXS drivetrain, powering the derailleur from the e-system battery instead of a separate AXS battery.
Integrating into the derailleurs AXS battery port, the cord routs through the bicycle frame into the e-system drive unit.

Features
- Works with any AXS derailleur
- Powers derailleur by main e-system battery

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

The Shimano EW-EC300 Charging Cable is compatible with new Shimano 12-speed road Di2 systems. This cable will also recharge the Dura-Ace R9200 and Ultegra R8100 power meter cranksets. 1700mm cable length

Shimano Di2 Junction Box

• All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
• Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Offering all the precision and functionality of the Dura-Ace power meter, the Ultegra FC-R8100-P power meter comes in a more affordable package.
- Integrated, waterproof, and rechargeable Li-ion battery
- Up to 300+ hours of ride time. * Depending on ANT+/Bluetooth® LE settings
- Accurate data collection. Software automatically compensates for temperature changes
- ± 1.5% strain gage accuracy throughout the entire calibration range. * Depending on ANT+/Bluetooth® LE settings
- Simple zero offset calibration with switch on transmitter
- New pedaling vector function helps you improve your pedal stroke and find increased biomechanical efficiency
- With the new web service SHIMANO CONNECT Lab, your pedal stroke can be analyzed and visualized in more detail than ever before
- HOLLOWTECH II Technology
- Chainrings not included
- BB set not included

Accurate, reliable power measurement is practically a requirement these days, and the Apex AXS crankarm power meter upgrade is the easiest way to get precise power numbers. With the tech hidden inside the DUB spindle, it fits almost any bike while remaining stealthy. - DUB-PWR spindle-based unit measures left side power to calculate total watts - Proven reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset)

SRAM AXS batteries, chargers, and battery accessories for all SRAM, eTap, and RockShox AXS system components.

• USB-C interface for improved conductivity and broad compatibility
• 60 minute charge time for four batteries, faster for one or two
• LED lights indicate charge status and power draw
• Benchtop or wall mountable design
• SRAM Model ID: AC-EAC-BC4P-A2

Measure your ride power data more accurately than ever with the Force 1 AXS power meter. It’s the lightest and stiffest integrated Force power meter we’ve developed yet. It’s accurate to +/-1.5%, unaffected by temperature changes and the direct mount X-SYNC chainring is aero and longer-lasting. Features - Power meter is fully integrated into the chainring for lighter weight and greater accuracy - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - DUB bottom bracket adds durability and simplicity - Available in 160, 165, 170, 172.5, and 175mm crankarm lengths