Stems
$199.99 - $224.99
- CNC machined 2014 aluminum body and 7075 aluminum clamps
- 240 degree wrap-around, twin plate clamping system
- External webbing to maximize structural strength
- 118-158g including stainless steel bolts
$79.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$59.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body
- Stack Height: 42mm
$69.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts
- Faceplate eliminates ‘stress risers'
$59.99
the Pro LT stem is constructed of strong and lightweight anodized 6061 alloy, and features a headlock system for a secure front clamp fixation.
$64.99
- Forged alloy construction
- Adjusts from 0 to +/- 60°
- 31.8mm, shims included to fit 25.4mm handlebar
$31.99
- 3D forged alloy construction
- Fits 1-1/8 (28.6mm) steerer forks
- Fits 25.4mm handlebar clamp
- M6 Black hardware
- Weight: 161g (110mm)
$43.99
- 3D forged alloy construction
- Fits 1-1/8-inch (28.6mm) steerer forks
- Fits 31.8mm handlebar clamp
- Heat treated hardware
- Weight: 152g (100mm)
$43.99
- 3D forged alloy construction
- Fits 1-1/8-inch (28.6mm) steerer forks
- Fits 25.4mm handlebar clamp
- M6 Black hardware
- Weight: 161g (110mm)
$42.49
$84.99
50% Off
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$42.49
$84.99
50% Off
EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount.
- 3D Forged EA70 Alloy
- Easton ICM direct-mount faceplate computer mount compatible
- TopLock Design for easy bar installation
- Finish: Black Ano
- Weight: 132g (100mm/0)
- Rise: +/- 7 degrees
- Clamp Diameter: 31.8mm
- Steerer: 1 1/8"
$124.99
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
$134.99
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height
$25.99
Lightweight and strong forged alloy stem.
- Adjustable between 0 and +60
- Removable face plate for easy installation.
- 180mm quill length.
$24.99 - $34.99
Lightweight and strong forged alloy stem.
- Adjustable between 0 and +60
- Removable face plate for easy installation
$23.99 - $27.99
Lightweight and durable 2D forged-alloy stem.
- Removable faceplate for easy bar installation
- 4-bolt clamp for optimal handlebar support
- High rise for improved riding comfort
- 35 degree rise
$33.99
3D forged 6061-T6 Aluminum.
- Excellent value and performance
- A great way to try a few different stem lengths to dial in fit
- Sand-blasted black finish
- 0 degree
- 1-1/8" steerer, 31.8mm bar clamp
- 135 grams (55mm)
$118.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.
- ±6° angle
- Integrated GoPro mount
- T25 fasteners for 1 tool across the cockpit
SPECIFICATIONS
- Stem Angle/Rise: 6 degrees
- Clamp diameter: 31.8mm
- Steerer clamp diameter: 1-1/8 in
- Hardware: Steel
$101.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.
- Perfect match with Descendant handlebars
- 3D forged 7075
- CNC machined for weight reduction
- Four bolt handlebar clamp
- Two bolt steerer clamp
$141.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go.
- Pair with BoXXer fork
- Gives DH riders lower more aggressive position
- Super-stiff, stable front-end handling
- Lightweight
- Two-piece design
$101.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.
- Colors: Black
- Material: Al-7075
- Lengths: 40mm, 50mm, 60mm
- Bolts: Steel
- CNC machined for weight reduction
- Four bolt handlebar clamp
- Two bolt steerer clamp
$101.00
Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Aluminum
- S.H.I.S. Stem Clamp Diameter: 28.6
$63.00
TruVativ's Hussefelt is an aggressive DH/freeride stem forged from 6061 aluminum for superb stiffness and superior strength. The short length provides supreme confidence when railing down the sketchiest steeps. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness.
$224.99
- Fully CNC machined
- Featuring an oversize center bore
- Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
$164.99
Entirely manufactured in the UK, this brand new stem combines precision engineering, function-led form and our trademark commitment to sustainability.
Custom-made stainless steel bolts ensure that the no-gap face plate is perfectly aligned; critical in protecting the handlebar and delivering strong, consistent clamping force.
Machined in our factory in the south of England. The VFS Stem body and face plate is made from UK-sourced aluminium that has a minimum of 75% recycled content, making this the most environmentally-friendly stem on the market.
Specifications:
- Stem: 75% recycled aluminium manufactured by PEMBREE
- Bolts: Custom UK-made stainless steel, manufactured by Precision Products
- Environment: Carbon Neutral
- Length: 35mm
- Handlebar: 35mm
- Rise: 0 degree
- Weight: 148g
- Warranty: 5 Years
- Certification: EFBE Tri-Test Certified
$385.18
There’s something about 7/8" (aka 22.2mm) handlebars that seem to attract the most abusive riders out there, so we’ve taken our popular Boxcar stem and beefed it up even further!
We already use 2024 alloy for all of our boxcar stems, as it has a higher fatigue and yield strength than 6061. We made sure the clamp was extra thick on this version and even added 2 more high-strength stainless faceplate screws.
Is it overkill? Definitely. You’d have to run this thing over in a tank to damage it, but we’re pretty sure this will be the last 7/8" stem you’ll ever have to buy.
- Machined in sunny Chico, California
- 6 bolt faceplate (stainless T25 bolts)
- 7/8" (22.2mm) bar clamp
- Stack height: 36mm
- 180g
$231.99
The Eternal stem impresses with its uniquely filigree, yet wide and aggressive look, as well as its technical values.
Made from high-strength aircraft-grade aluminum, it's made to last. With a clamping width of 55 mm, the Eternal ensures optimal rigidity in the cockpit, but is still compatible with almost all carbon handlebars. Due to the length of 35 mm, your steering movements are transmitted directly.
Includes:
Eternal Stem 35mm
Oak Components ahead cap
Stem Bolts in Silver & Black (6 pcs each)
Silver ahead cap screw
Signature Oak stickers
User manual
Specifications:
Handlebar clamp: 35 mm
Stem Length: 35mm
Weight: 144 g (without top cap)
Handlebar clamping width: 55 mm
Clamp height steerer tube: 39.2 mm
Weight approval: 130 kg
ASTM tested: Category 6
$150.00
After a delay, the king is back. We've updated the NSB Overlord stem to accommodate 35mm diameter handlebars. A wider clamp area and refined shape improve strength while retaining what we feel are the correct proportions. Still, light enough to pedal all day and strong enough to tackle full days in the Whistler Bike Park.
The 35mm diameter stem is available in 35mm and 40mm lengths and will be available in all colors for the smaller Overlord.
Specifications:
- Clamp Size: 35mm handlebar
- Fork Steerer Tube: 1 1/8?
- Rise: 0-degree
- Stack Height: 38mm
- Hardware: 8.8 Grade Gold Zinc plated M6 bolts
- Precision CNC Machined in Whistler, B.C.
Weight:
35mm – 190g
40mm – 196g
$135.00
Strong enough to endure a season in the Whistler Bike Park and light enough to pedal all day. The Overlord rules everywhere your bike can take you.
We’ve updated the selection to suit modern bikes better and now offer a short 32mm length to accompany our 40mm and 50mm lengths.
Specifications:
- Clamp Size: 31.8mm handlebar
- Fork Steerer Tube: 1 1/8?
- Rise: 0-degree
- Stack Height: 38mm
- Hardware: 8.8 Grade Gold Zinc plated M6 bolts
- Precision CNC Machined in Whistler, BC
Weight:
32mm – 148g
40mm – 170g
50mm – 186g
60mm – 190g
70mm – 205g
$104.99
- 3D forged and CNC machined from AL6061/T6
- 4-bolt cold-forged front clamp
- 40 mm fork clamp stack height
- Weight: 144 g (100 mm)
Page 1 of 2
Next page