Electronics

Replacement GPS mount insert for the Direct X-Lock Mount System and the Alloy CNC Forward Mount.

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

Cadence Magnet for all CatEye computers that record cadence.

Wheel magnet for all CatEye cycle computers

Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.

- Handlebar mount for CatEye wired computers - Compatible with Velo 7 and Velo 9

The smartphone case to connect your phone to any VACUUM smartphone mount. The slim case protects the smartphone on and off the base. The understated elegance of the inconspicuous case with a shockproof TPU surrounding is accompanied by the decorative as well as practical ratchet and recessed geometry. Soft material on the inside of the case protects the phone’s backside. Thanks to the ingeniously simple combination of magnetic force and vacuum pressure, the smartphone can be operated with one hand and is 360° rotatable, while a ratchet prevents it from rotating itself! - Smartphone case for different smartphone models - Slim design with shock-proof surrounding - Anti-scratch fibre inlay - No interference with electronics - Not suitable for wireless charging - Fits all VACUUM bases - The recessed geometry allows the smartphone to rotate 360° as soon as it is attached to the VACUUM mount Extent of delivery: smartphone case Delivery without VACUUM base.

Magnetic force + vacuum = two are better than one. The smartphone holder for the handlebars has a low profile and can be easily attached to the handlebars with a clamp or cable ties. The set includes two clamps for handlebars with a diameter of 22.2 mm and 31.8 mm, as well as a universal solution with cable ties for other handlebar sizes. When riding without a smartphone, the VACUUM handlebar base blends unobtrusively into the overall appearance of the handlebars. The combination of vacuum and magnetic force keeps the mobile phone securely on the holder - even when riding over kerbs, cobblestones or root trails. The magnetic counterpart is located on the smartphone. Either in the form of a special VACUUM mobile phone case or the universal VACUUM adhesive patch for your existing mobile phone case. The connector allows the smartphone to be easily connected to the holder and is held reliably on the handlebar. The magnetic force centres the smartphone on the holder - this ensures that the suction force of the vacuum is always guaranteed, as the mobile device cannot slip. As soon as forces act that exceed the attractive force of the magnets, the hold is additionally secured by the suction cup, which creates a vacuum. The smartphone is released by simply pressing a lever on the side of the holder. Thanks to the ingenious simple combination of magnetic force and negative pressure, the smartphone can be operated with one hand and rotated 360°, while a ball catch prevents it from turning during the journey. - Smartphone mount for the handlebar - Fits all bar tubes Ø 22-46?mm - One-handed attachment and detachment of the smartphone - Mobile phone can be rotated 360° on the holder - No interference with electronics - Fits all VACUUM cases Extent of delivery: VACUUM handlebar base two clamps for 22,2mm and 31,8mm bars two 8mm and two 10mm screws cable tie mount including two cable ties Delivery without VACUUM case (iPhone/Samsung) or uni phone patch.

The smartphone mount for the ahead cap consists of a special ahead cap that is screwed to the head tube. The base is then placed on the cap and is easily secured with a clamp using a knurled screw, or theft-proof with an Allen screw. The ahead cap base can thus be quickly removed when no smartphone is needed, while the plain cap remains screwed to the bike. The magnetic counterpart is located on the smartphone. Either in the form of a special VACUUM mobile phone case or the universal VACUUM adhesive patch for your existing mobile phone case. The connecting piece makes it easy to attach the smartphone to the holder and holds it reliably on the windscreen. The magnetic force centres the smartphone on the holder - so the suction force of the vacuum is always guaranteed, as the mobile device cannot slip. As soon as forces act that exceed the attractive force of the magnets, the hold is additionally secured by the suction cup, which creates a vacuum. The smartphone is released by simply pressing a lever on the side of the holder. Thanks to the ingeniously intuitive combination of magnetic force and negative pressure, the smartphone can be operated with one hand and can be rotated through 360°, while a ball catch prevents it from turning during the journey. - Smartphone mount for installation on the ahead cap - One-handed attachment and detachment of the mobile phone - Mobile phone can be rotated 360° on the holder - Fits all 1 1/8” threadless headsets - No interference with electronics - Fits all VACUUM smartphone cases Content of delivery: VACUUM ahead cap base ahead cap including screw clamp including knurled and Allen screw Delivery without VACUUM case (iPhone/Samsung) or VACUUM uni phone patch - the magnetic counterpart needs to be ordered separately.

Protective Silicone case for Edge 1040 and 1040 Solar

The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 11 Pro

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone X/XS

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone XR/11

COMPIT Universal-Cover Adapter (or COMPIT Phone Covers) are needed to securely mount the phone to the COMPIT unit. The adapter with the special mounting device allows the phone to be docked into the COMPIT system. The cover attaches to the user's favorite phone case with self-adhesive 3M film.

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal - Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

The Velo 7 is CatEye’s entry level wired 7 function bike computer made simple with pre-programmed tire sizes.

MORE POWER, WITH SECURITY, MORE COMFORT. Water-repellent mobile phone case for the bicycle handlebar Everything in view - in any weather: The smartphone case COM/SMARTBAG can be attached to any COMPIT cell phone holder thanks to the adapter. A special COMPIT cover is therefore not necessary. The large transparent window ensures that the touchscreen is easy to operate, and it is also possible to unlock the cell phone with a fingerprint directly through the film. The lower extra compartment not only offers additional storage space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone while driving. For attachment to the COMPIT mobile phone holder system When touring in rough terrain, it is advisable to charge the cell phone with a cable. Optionally, the COM/UNIT can also be attached directly under the SMARTBAG to the COMPIT smartphone holder. In this case, the mobile phone must always be charged via cable through the cable guide. Suitable for smartphones with a maximum size of 155 x 80 x 15 mm. - Only compatible with the COMPIT system - Extra storage space - Water-repellent - Can be operated through foil - For all common smartphones - Weight: 115g

Lightweight, rugged CNC machined aluminum aero bicycle mount. Simple, reliable single-pivot 31.8 bar clamp. Secondary adjustable swivel provides perfect device positioning. Compatible with Lezyne X-Lock mount GPS cycling computers. Extra-secure and replaceable Composite Matrix X-Lock insert. Refined aluminum design with classic Lezyne styling. All stainless steel hardware. Perfect for the cyclist looking to streamline his or her cockpit with a beautifully stealth anodized black GPS computer mount. - Weight: 37g

The CatEye Enduro features a large, easy to read screen combined with a heavy-duty wiring kit for extra durability. - Heavy-duty wired computer - Auto start/stop - Pace arrow - Simple tire size - Programmable odometer - Zip tie mount compatible with FlexTight universal bracket

- Dual-band Bluetooth and ANT+, magnetless sensor with integrated accelerometer - Quick pairing with CatEye Cycling app (Bluetooth) - Waterproof IPX7 (based on JIS C0920) - Works with Padrone Digital, Padrone Smart+, Padrone Smart*, and Strada Smart* *For Padrone Smart and Strada Smart, works in Mirror Mode only

- USB-A Edge Power Mount Cable - 400mm

- Universal: adaptator compatible with all smartphones - Sticks directly on phone or phone case - 3M VHB adhesive that dampens vibrations and has an extreme adhesive capacity - Quarter-turn type Z-Mount allows to lock and unlock your phone in seconds - Bi-material: overmolding guarantees flexibility and high resistance

- Adjustable handlebar mount for any Z Console - Puts the phone front & center of the stem in either landscape or portrait mode - Integrated GoPro camera mount - Sturdy aluminum construction - For 31.8mm handlebars (includes shims for smaller diameters)

- Roll-top, waterproof smartphone case desingned for universal use - Touch screen compatible - Clear window for camera use - Simple-to-use smartphone mount for bikes - Easy installation in one click - 360 degrees adjustable angle

Super-compact and lightweight magnet-less cycling cadence sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to a crankarm. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm

Super-compact and lightweight magnet-less cycling speed sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to most hubs. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm